Costs·6 min read

Brussels Just Took the First Step Toward Regulating Truck Tyre Wear: What It Means for Your Tyre Budget

A UNECE task force met in Brussels on 8-9 October to work out how to measure abrasion on truck and bus tyres, the first real move toward extending microplastics rules beyond passenger cars. It's early-stage, but the direction of travel will eventually touch tyre specs, mileage and cost per kilometre.

FleetlySolutions · 26 October 2026

What happened in Brussels

On 8 and 9 October, the UNECE Tyre Abrasion Task Force met in Brussels with a specific goal: working out how abrasion from C3 tyres, the category covering trucks and buses, can be reliably measured for future regulation. It sounds like a narrow technical question, but it's the first real step toward extending a regulatory framework that has so far only been built for passenger cars.

The meeting examined C3 tyre segmentation, possible simplified testing methods, a phased introduction of requirements, and the testing resources all of this would demand. None of this produces binding rules yet. It's the groundwork for rules that will come later, and the choices made now about how trucks tyres are tested will shape what those rules eventually look like.

Why tyre wear has become a regulatory target

The underlying driver is straightforward: as exhaust emissions fall with newer diesel engines and the gradual rollout of zero-emission trucks, regulators are turning their attention to emissions that happen elsewhere on the vehicle. Euro 7, unlike earlier emissions standards that focused almost entirely on exhaust, introduces requirements covering non-exhaust emissions, including brake particles and tyre abrasion.

Tyre wear releases microplastic particles into the air and onto road surfaces, and UNECE has flagged it as a significant contributor to microplastic pollution more broadly. Passenger car rules are already well advanced: UN Regulation No. 186 has established an abrasion testing framework for C1 (passenger car) tyres, with the first stage beginning 30 June 2028. Work on C2 tyres, covering vans and light commercial vehicles, is also progressing, with proposals expected to go before the UNECE Working Party on Noise and Tyres in February 2027.

Why truck tyres are a harder problem than car tyres

Commercial vehicle tyres present regulators with a genuinely different challenge than passenger cars. Measuring truck tyre abrasion is considerably more complicated, and simply applying the passenger-car testing methodology to heavy commercial vehicles may not produce a fair or representative result.

A steer tyre, a drive tyre and a trailer tyre are built around completely different performance priorities, and a long-haul motorway tyre operates in very different conditions from one fitted to an urban distribution truck or a construction vehicle. Regulators may need to distinguish between these use cases rather than treating every C3 tyre the same way, which is exactly the kind of segmentation question the October meeting was set up to work through.

The realistic timeline, not the headline one

It's worth being precise here: C3 truck and bus tyres are still at the measurement-methodology stage, several steps behind passenger car tyres. Earlier UNECE planning documents put proposed C3 abrasion limits several years out, well behind the C1 timeline that only takes effect from mid-2028. Nothing here changes what you buy or spec this year or next.

What does matter is that the decisions being shaped now, about how C3 tyres are segmented and tested, will determine the rules operators eventually have to work within. Tyre compounds, tread designs, expected mileage and ultimately tyre prices could all shift as manufacturers start developing products ahead of a regulation that is still several years from being finalised for trucks.

What this means for your tyre spend

For fleet managers, the practical takeaway isn't urgency, it's awareness. Tyre abrasion regulation could eventually make whole-life tyre performance, not just upfront price, a more formal part of how tyres are rated and compared. That reinforces something most experienced fleet managers already know: the cheapest tyre per unit is rarely the cheapest tyre per kilometre once you account for mileage, rolling resistance and replacement frequency.

Tyre and rim manufacturers are already running test programmes to get ahead of whatever limits eventually land, so expect to see abrasion performance data start appearing in manufacturer marketing well before any mandatory labelling exists. Treat early claims with some caution until there's a finalised test method and limit to measure against.

Where FleetlySolutions fits

Tyres are one of the few major cost lines that fleets can genuinely optimise through better operational data rather than new hardware. FleetlySolutions' per-kilometre pricing engine already breaks freight costs down into their real components, including consumables like tyres, so you can see how wear costs move against route type, load and driving patterns rather than treating tyre spend as a flat overhead.

As abrasion-linked tyre specs and pricing start to differentiate over the next few years, having clean, structured cost-per-kilometre data will matter more, not less. Document OCR also makes it straightforward to digitise tyre invoices and maintenance records as they come in, so the cost history is there when you need to compare tyre performance across your fleet rather than relying on memory or scattered paperwork at renewal time.

Put this into practice

See how FleetlySolutions plans, prices and audits your loads. Book a 20-minute demo.